Signalmanagement Digital

HDMI Control Basic 4K60

HDMI Control Basic 4K60 is designed for automatic system control and HDMI signal extension in small meeting rooms such as huddle spaces as well as classrooms. The controller supports three system trigger methods, video signal via 5V or TMDS as well as IR signal detection. It automatically activates the equipment by transmitting CEC-, pre-loaded RS232- and/or IR-commands to turn on any display or projector connected. A relay control to rise the projection screen is included additionally. Once the HDMI Control Basic 4K60 can’t recognize the video signal or IR commands any more the room will be shut-down after a certain period of time.  


Kindermann 4K60 HDMI 2.0 Extender

The Kindermann 4K60 HDMI 2.0 Extender is a high quality HDMI 2.0 repeater. It supports resolutions up to 4K 60Hz (4:4:4) and data rates up to 18 Gbps. It refreshes the HDMI input signal and increases the maximum HDMI cable length. 4K60 HDMI 2.0 Extender is powered via HDMI 5V of the signal source so that typically no external power supply is required.  


FXT-460 4K HDMI 2.0 FiberOpticExtender

Hall Research FXT-460 is a compact and powerful extender for HDMI 2.0 audio / video with full bandwidth with HDR up to 10 kilometers over a single strand of LC fiber optic cable. - 4K x 2K @ 60 Hz 4:4:4 / 18.2 Gbps / HDCP 2.2 - Extends up to 33,000 ft (10 Km) over single mode or 1000 ft (300 M) Multi-Mode - Bi-Directional RS-232 and EDID Management - Can pass original HDMI audio or embed/substitute audio from external inputs - “HDMI Audio Bridging” - HDMI Loop Output on Sender Set consists of FXT-460S and FXT-460R  


HDMI Extender Basic 1:1

Extends the maximum cable length to up to 35 m  


4K60 Audio Extraktor

The Kindermann 4K60 Audio Extraktor is a compact HDMI 2.0 audio de-embedder with 1 HDMI input, 1 HDMI output, and three kinds of audio outputs. It is designed to extract audio from 4K HDMI signals via stereo balanced L/R audio, analog RCA, and coaxial S/PDIF digital audio output ports. It supports 4K@60Hz/4:4:4 HDR with EDID & CEC pass-through. The transmission rate is up to 18 Gbps. Moreover, there are three audio modes that can be chosen in order to be compatible to various applications and connected devices.  


USB-EDID-PRO2 Reader / Programmer

The USB-EDID-PRO2 can be used to read the EDID from any VGA, DVI or HDMI monitor, or similar device. It can also program a new EDID back into the device (if target is write enabled and allows programming).  


4K HDMI Splitter 1 auf 2

Verteilt ein HDMI Signal von einem Abspielgerät auf zwei Wiedergabegeräte. 1 Eingang / 2 Ausgänge (HDMI Buchsen). Unterstützt 4K2K, Deep Colour (30/36 bit), EDID und HDCP 1.3, DTS Digital, Dolby Digital (inkl. DTS-HD und Dolby True HD), HDMI 1.4a konform, Bandbreite: 340 MHz  


UltraSlimHDMISplitter 1x4

Ultra Slim HDMI Splitter, 1x4, 4K/60Hz HDR, HDCP 2.2, 18 Gbps, Micro USB Power. Splits one HDMI signal to 4 displays - supports UHD 4K / 60 Hz with HDR.  


SP-HD-4C 1 x 4 HDMI Splitter

Der SP-HD-4C ist ein kompakter 4K60 4- Kanal HDMI Video-Verteiler zur Ausgabe von 4 identischen Signalen einer HDMI Eingangsquelle an bis zu 4 Displays. Er unterstützt pro Ausgang wahlweise Full-HD (1080p) oder 4K (UHD) Videoformate. Zusätzlich kann das Audiosignal aus dem HDMI Eingangssignal ausgekoppelt und als analoges (L/R) Stereosignal und digitales, optisches TOSLINK Signal ausgegeben werden. Ist kein Display verbunden emuliert der SP- HD-4C ein Display (mittels EDID), so dass die Quelle weiterhin HDMI Video ausgibt und der Splitter den Ton auskoppelt. Das Gerät ist HDCP 2.2 konform und unterstützt HDMI 2.0 Deep Color, 3D, UHD 4K/60 einschließlich aller HDMI Audio Formate.  


SP-HD-8B 1:8 4K HDMI Splitter /Audio

The SP-HD-8B is a compact 4K 8-channel HDMI Video Splitter that can produce 8 identical outputs of a HDMI (or DVI) input source for display on 8 outputs. It supports Full-HD (1080p) as well as 4K (UHD) video formats. Furthermore, the device extracts the audio from the HDMI input signal and outputs it as analog (L/R) stereo, and digital optical TOSLINK signals. If no output display is connected (or if the displays are turned off), the SP- HD-2B will emulate a display (using EDID) so the source still outputs HDMI video and the splitter will extract and output the audio. SP-HD-8B is HDCP compliant and supports HDMI 1.4 deep color, 3D, UHD 4K/30, and handles all HDMI Audio formats.  


HDMI Switch 41 automatic 4K60

The Kindermann HDMI Switch 41 automatic 4K60 is a high quality, ultra-compact 4K60 HDMI Switcher with 4 HDMI Inputs. The unit can switch 4 HDMI video inputs to an HDMI output including audio de-embedding via 3,5 mm headphone jack. The device automatically recognizes the inputs and switches automatically or manually via infrared or RS232. The Kindermann HDMI Switch 41 automatic 4K60 can be used for diverse applications, e.g. in meeting rooms, classrooms, retail stores or home cinema.  


HDMI Share Basic 21 Automatic

Automatic switch between two HDMI sources. 2 inputs / 1 output (HDMI, f). Max. Full-HD/WUXGA resolution, auto switching or use showme button supports HDMI 1.3  


4K HDMI Share Basic 31 Remote

Schaltet 3 HDMI Eingänge automatisch, per Tastendruck oder IR-Fernbedienung auf einen Ausgang um. 3 Eingänge / 1 Ausgang (HDMI Buchsen) Unterstützt 4K2K, Deep Colour (48 bit), EDID und HDCP 1.3. Unterstützt DTS Digital, Dolby Digital (inkl. DTS-HD, Dolby True HD) HDMI 1.4a konform  


HDMI 4-Port Switch

The SW-HD-4 is a 4 input HDMI switcher with InstaPort Technology from Silicon Image enabling fast switching of four HDMI sources to a single HDMI output. The switcher supports 4K (UHD), 3D, 36-bit Deep Colour video.  


SSW-HD-4 HDMI Seamless Switch

SSW-HD-4 is a 4-input HDMI seamless video switch with multi-view capabilities where all inputs can be simultaneously shown in real-time in a variety of window configurations. When only one input is shown, switching between different inputs is completely seamless with zero transition delay. The switcher supports various PC and HDTV resolutions including 1080p Full HD on its input and produces a scaled Full HD video output. SSW-HD-4 can display four Hi- definition sources on a single display and comes with several pre-configured multi-view layout modes.  


Kindermann HDMI Switch 41 4K60 KVM

The HDMI Switch 41 4K60 KVM features four HDMI video inputs and one output. It supports HDMI video resolution up to 4Kx2K@60Hz 4:4:4. Additionally it is equiped with four USB 3.0 type-B (host) and three USB 3.0 type-A ports (device) for KVM management, e. g. to control up to four computers from a single keyboard, mouse and monitor or to shares one USB conferencing camera. Inputs: 4x HDMI Outputs: 1x HDMI, 3,5 mm jack (stereo) USB Host: 4x USB Typ-B USB Device: 3x USB Typ-A Bandwidth: HDMI 18 Gbs, USB 3.2 Gen1 - 5 Gbs (max.) Control: Auto switching, RS232, dry contact closure, front buttons Power supply: 12V DC 2A  


Kindermann MultiSwitch 41 4K60

MultiSwitch 41 4K60 allows the selection of four different sources to one HDMI output. It supports video resolution up to 4K@60Hz 4:4:4 8bit, 1080p, and 3D as well as advanced EDID management. Inputs: 1x HDMI, 1x USB-C, 1x DisplayPort, 1x VGA incl. audio Output: 1x HDMI, 1x audio digital (Coax), 1x Audio analoge (balanced) Control: auto mode, RS232, CEC, IR remote , front buttons Bandwidth: 18 Gbs, supports HDCP 2.3 Power supply: 12V DC 2A Dimensions (WxHxD): 300x 26 x 115 mm  


Kindermann Multishare 41 automatic

Kindermann MultiShare 41 automatic is a high performance, yet cost-ffective 4K Ultra-HD 4 to 1 multi-format switcher with extensive control options. It provides 4 selectable video inputs for 2 x HDMI, 1 x DisplayPort and 1 x VGA including 3.5 mm Audio. The HDMI signal output provides additional audio de-embedding via 3.5 mm headphone jack. It provides enhanced EDID management and support for 4K2K resolutions. MultiShare 41 automatic can be used as a multi-format, single point of connection and audio de-embedder for a variety of applications, e.g. meeting rooms, classrooms, lectern halls, town halls and so on.  


SC-3H Multi-Format Switcher/Controller

The SC-3H is a multi-format switcher with 2 HDMI and 1 VGA (with audio) inputs. The SC-3H provides an HDMI video output together with stereo analog audio output. HDMI inputs support virtually all PC and TV resolutions including 4K @ 30 and 4K @ 60 (4:2:0). The VGA and its associated audio inputs are converted to HDMI and scaled to 1080p for maximum compatibility with HDMI TV's. The device can also act as a controller to send serial RS232 commands to turn displays on and off. Affordably priced, the SC-3H provides a powerful and cost effective way to add AV switching and control to any classroom, huddle room, or conference room.  


HD-AUD-IO HDMI 2.0 Audio Processor

The Hall Research HD-AUD-IO is an HDMI audio inserter with a host of advanced features. It provides one HDMI input along with digital and analog audio inputs. It has one HDMI output whose audio can be selected by the user to be either the original audio of the HDMI input, multi-channel audio received on the SPDIF digital input, or the audio from its 3.5mm stereo analog input. Advanced EDID management allows the user to define an “emulated” EDID, which can be a factory default EDID, or learned from a connected device using a simple learn push button. HD-AUD-IO includes the ability to output an HDMI signal with embedded audio even if there is no HDMI input ("Audio Bridging").  


KVM-HDU-4 4-Port HDMI KVM Switch

The KVM-HDU-4 is a compact 4-port HDMI KVM Switch with USB 2.0. The switch offers 4K UHD video support and keyboard / mouse emulation for all 4 PC inputs. All host PC's “see” the connection to keyboard and mouse. The data from the “actual” keyboard and mouse connected to the KVM is sent only to the selected PC. The front panel features 4 individual buttons for input selection and LED indicators for status feedback. Inputs can also be selected via hot- key sequences from the keyboard. No power supply required for most applications since power is drawn from the Host-PCs. For manual video-only switching use an optional 5VDC / 2A power supply (not included).  


4K HDMI Matrix 42

Kostengünstiger HDMI Matrixumschalter mit Infrarotfernbedienung - verteilt das Signal von 4 Eingängen auf bis zu zwei Wiedergabegeräte.  


HSM-44-BX 4K 4X4 HDMI Matrix Switch

The HSM-44-BX is a 4x4 4K cross-point switch in a compact 1-RU enclosure. Each output has an integrated video splitter so that simultaneous HDMI and HDBaseT are provided. The HDBaseT outputs extend HDMI, IR, RS-232, Ethernet, and Power over a single CAT6/7 cable up to 100m. The HDBaseT outputs are compatible with all compliant HDBaseT receivers such as the Hall Research's HBX-R. The matrix intelligently calculates EDID for each input based on the EDID of the connected sinks. The HSM-44-BX matrix is ideal for conference rooms, multimedia presentations, digital signage, houses of worship, and many other settings.  


HSM-88-4K 8x8 UHD HDMI Matrix Switch

The HSM-88-4K is an 8x8 cross-point 4K switch in a compact 1-RU enclosure. It supports HDMI 1.4b for 3D format and supports deep-color to 12 bits per component (36-bit color routing), supports HDCP, PCM, Dolby, DTS, and HD audio standards. It may be used with any combination of DVI (PC) or HDMI (HDTV) sources and displays. The matrix switch automatically performs intelligent EDID capability mapping between sinks and sources. The HSM-88-4K Genesis Digital matrix is ideal for home theater, conference room, multimedia presentation, digital signage in retail space, and other similar settings.  


Multiscale 5x1 4K60 Scaler /HDBT Out

Kindermann Multiscale 5x1 4K60 Scaler /HDBT Out is a compact and powerful 5 input presentation switcher/scaler that supports 3 HDMI, 1 VGA (YPbPr/ CVBS) and 1 DisplayPort input signals with up to 4K@60Hz (4:4:4) resolution, scaling them to mirrored HDMI and HDBT (RJ45) outputs. The device supports embedded or separate analog audio for each digital input and features a microphone mixing input. It offers flexible control options including IR, front sensor buttons, RS232, IP (with integrated Webserver GUI), contact closure and automatic switching modes. Display power on/off function. This switcher is an easy-to-use "all-in-one" presentation solution for small to mid-sized meeting rooms, classrooms and huddle spaces.  


SC-1080R Multi-Format Switcher/Scaler

The SC-1080R can switch and scale among 8 AV inputs (3 HDMI, 3 VGA, 1 YPbPr, 1 Composite Video). It provides 3 simultaneous outputs (2 HDMI, 1 VGA). All outputs show the selected input. Inputs support various PC and HDTV resolutions (Composite Video input supports NTSC and PAL). The output format and resolution can be specified as either PC (VGA to WUXGA), or HDTV (YPbPr/YCbCr from 480i to 1080p). Both Analog and Digital audio outputs are provided for convenience. The Video Scaler can be controlled in many ways including: front panel pushbuttons, using the included IR remote control, Telnet (via LAN), WebGUI (via LAN), or RS232 Serial interface.  


Scaler VGA to HDMI

HDMI, HDCP, and DVI compliant. Any PC or HDTV video signal can be scaled up or scaled down to any other PC or HDTV resolution.  


SC-HD-2B HDMI Scaler&Audio Emb.

Skaliert ein DVI/HDMI Signal auf eine höhere oder niedrigere Auflösung, verarbeitet 50/60Hz Bildwiederholraten in Echtzeit, extrahiert oder ergänzt das Audiosignal und gibt es analog oder digital aus, ermöglicht die horizontale Bildspiegelung z. B. für Teleprompter. Unterstützte Bandbreite: 600MHz,18Gbps Unterstützte Auflösungen: VGA 640/480 - WUXGA 1920/1200 (über DVI/I) 640x480@60 - 4096x2160p@24,25,30,50,60 Eingänge: HDMI, 3,5 mm Audio Klinke, Toslink, Ausgänge: HDMI, 3,5 mm Audio Klinke, Toslink.  


DVI Splitter Basic 1 : 2

Splits 1 DVI-D signals to 2 outputs  


Power Supply 5V/2A

Output: 5 VDC 2A - max. 10 Watt Input: 90 - 264V Connector: 2.1x5.5x11-S Lenght of cable: 1,4 m Dimensions: about 64 x 30 x 46 mm Color: black  


F10537-KIT Rackmount Kit for SP-HD-8B

19 inch Rack Mount Kit for the Model SP-HD-8B > Sturdy Construction > Matching Finish  


Product Search